Morphometric analysis of tooth morphology among different malocclusion groups in a hispanic population.

BACKGROUND: There have been reports of unique dental morphological features amongst Latin American and Hispanic populations, and this might invalidate the use of current orthodontic diagnostic tools within this population. There are no tooth size/tooth ratio normative standards for the Hispanic population, despite overwhelming evidence about differences in tooth size between racial groups. OBJECTIVE: This study aimed to determine whether there are significant differences in 3-D tooth shape between patients with Angle Class I, Class II, and Class III dental malocclusion in the Hispanic population. METHODOLOGY: Orthodontic study models representing Hispanic orthodontic patients with Angle Class I, II, and III dental malocclusions scanned using an intra-oral scanner. The scanned models were digitized and transferred to a geometric morphometric system. Tooth size shape were determined, quantified, and visualized using contemporary geometric morphometric computational tools using MorphoJ software. General Procrustes Analysis (GPA) and canonical variates analysis (CVA) used to delineate the features of shape that are unique to each group. RESULT: The study revealed differences in tooth shape between the different dental malocclusion groups on all twenty-eight teeth that were studied; the pattern of shape differences varied between the teeth and the dental malocclusions. The MANOVA test criteria, F approximations, and P-values show that shape in all the groups was significantly different < 0.05. CONCLUSION: This study revealed differences in tooth shape between the different dental malocclusions on all teeth, and the pattern of shape differences varied between the different dental malocclusions group.

Prevalence and extent of Alveolar dehiscence and fenestration in Class I hyperdivergent subjects with different buccolingual inclinations of maxillary molar teeth: a CBCT study

Buccolingual position of teeth could affect the prevalence of alveolar bone defects. Presence of alveolar defects may have a deleterious effect on orthodontic treatment. The aim was to assess the prevalence and extent of dehiscence and fenestration in Class I hyperdivergent subjects and correlate it with buccolingual inclinations(BL) of maxillary first molar teeth. Methods: This retrospective study involved 80 CBCTs of class I hyperdivergent subjects divided into two groups - group A (n=33) buccolingual inclination >9º and group B (n=47) buccolingual inclination <9º. Prevalence and extent of alveolar bone dehiscence and fenestrations were measured in CBCTs using OSIRIX Lite software. Descriptive statistics, Mann Whitney U test and Spearman correlation were done for evaluating intergroup differences and correlation with Buccolingual inclination. Results: Overall prevalence of dehiscence and fenestration in maxillary first molars was 60.95% and 5% respectively. In the buccal alveolar bone, prevalence of dehiscence was highest in group A (84.6%) for 16 and in the lingual alveolar bone prevalence of dehiscence was highest in group B (71.4%) for 26 . On intergroup comparison, the extent of lingual alveolar bone dehiscence (26) in group B was significantly higher (p value <0.05) than in group A. No significant correlation between the extent of dehiscence and fenestration with buccolingual inclination of molar teeth was noted. Conclusion: Molar teeth with BL inclinations of more than 9º had higher prevalence of dehiscence on the buccal side and molar teeth with BL inclinations less than 9 degrees had more dehiscence on the lingual side. But no significant correlation of BL inclination with prevalence and extent of dehiscence and fenestration was noted

Class I and Class II Patients Treated with Damon System: A Study of Transversal, Sagittal and Torque Values Variations

ABSTRACT Objective: To analyze the transversal and anterior-posterior changes obtained in patients treated only with the Damon system. Material and Methods: 51 patients with either class I or class II division 1 sagittal relationship treated with the Damon system and the same archwire sequence were retrospectively selected. Dental casts of each patient before (T0) and after treatment (T1) were scanned and analyzed using NEMOCAST 3D software. Inter-molar, inter first-premolar, inter-second premolar and inter-canine distances were measured in both upper and lower arches. Initial and final lateral cephalograms were traced using the OrisCeph program. Pre and post-treatment measurements were compared using the t-test for repeated measurements. The Pearson Correlation Index and Linear Regression Analysis were used to determine the dependence between continuous variables. The significance level was set at 0.05. Results: Transversal diameters in the upper arch increase statistically significantly, especially in the bicuspid area. Initial intra-arch diameter was the only statistically significant variable correlated with the final expansion obtained. A linear negative correlation between the initial latero-posterior torque and the final expansion was observed in both arches. Conclusion: Using identical arches in patients with very different initial characteristics, the changes in bicuspids' diameters remain the most predominant. Patients with initial more negative torque in the posterior region had a higher expansion amount.

Therapeutic approach in Class I malocclusion with impacted maxillary canines.

OBJECTIVE: To emphasize the importance of diagnosis and discuss the therapeutic approaches that can be used in the orthodontic treatment of Class I malocclusion associated with two impacted maxillary canines. The opening of spaces for traction of these teeth by means of rapid maxillary expansion or extraction of maxillary premolars was contraindicated in the case reported. Therefore, it was decided to open spaces with projection of incisors. RESULTS: The obtained results were satisfactory, as a good occlusion was obtained, with adequate functional guides, as well as an improvement in the facial appearance. CONCLUSION: The projection of the incisors prior to traction of the impacted maxillary canines proved to be a valid option in the case described. Ten years after completion of treatment, the case is stable, maintaining periodontal health.

A preliminary study of buccal and lingual alveolar bone thickness of posterior teeth in patients with skeletal Class III malocclusion and mandibular asymmetry.

INTRODUCTION: The purposes of this retrospective study were to investigate the buccal and lingual alveolar bone thickness values of the posterior teeth in patients with asymmetrical skeletal Class III malocclusion and compare them with patients with symmetrical skeletal Class III and Class I malocclusion. METHODS: Seventy-eight cone-beam computed tomography scans were classified into 3 groups according to the sagittal pattern and menton deviation: asymmetrical Class III (n = 26), symmetrical Class III (n = 26), and symmetrical Class I (n = 26). The buccal and lingual alveolar bone thickness of the first molar and premolars in the maxilla and mandible were measured at 3, 6, and 8 mm apical to the cementoenamel junction and the apical and middle levels of the root. Measurements were compared among the 3 groups. RESULTS: In the asymmetrical Class III group, the buccal alveolar bone along the distobuccal root of the maxillary first molar on the deviated side was thinner by 1.07 to 1.10 mm than that in the symmetrical Class I group at 6-mm, 8-mm, and middle-level planes (P <0.001, P <0.01, and P <0.001). The buccal alveolar bone thickness along the distal and mesial roots of the mandibular first molar on the deviated side was thinner by 1.28 to 1.85 mm, and by 0.72 to 1.21 mm, respectively (P <0.001 and P <0.01), than that in the symmetrical Class I group at 6-mm, 8-mm, apical and middle-level planes. CONCLUSIONS: In this preliminary study, patients with skeletal Class III malocclusion showed thinner buccal and lingual alveolar bone in the posterior teeth than subjects with Class I malocclusion. Particular attention should be paid to buccal alveolar bone thickness along the distobuccal root of the maxillary and distal root of the mandibular first molar to prevent periodontal complications in decompensation. Future studies should involve larger sample sizes, more repeatable and comprehensive measuring and statistical methods.

Factors affecting the stability of maxillary extraction site closure.

INTRODUCTION: A side effect observed in cases treated with extractions is the instability of orthodontic space closure. OBJECTIVE: The aim of this study was to investigate the influence of gingival invagination, presence of third molars and facial pattern, on the stability of orthodontic space-closure in the maxillary arch. METHODS: Ninety-nine subjects (41 male and 58 female) with Class I malocclusion treated with four premolars extraction were evaluated. Extraction sites reopening and gingival invaginations were evaluated in scanned dental models in the posttreatment and 1-year posttreatment stages (mean age 16.1 years). Third molars presence was evaluated at 1-year posttreatment panoramic radiographs, and the facial pattern (SN.GoGn) was evaluated in the initial lateral headfilms. Multiple logistic regression analysis was used to estimate the influence of the aforementioned independent variables on the frequency of extraction space reopening. RESULTS: Space reopening was observed in 20.20% of the subjects 1-year post-debonding. Gingival invaginations were present in 25.73% of quadrants after debonding and in 22.80% 1-year posttreatment. The mean pre-treatment SN.GoGn was 35.64 degrees (SD=5.26). No significant influence was observed of the three independent variables on the instability of extraction site closure. CONCLUSIONS: The presence of gingival invaginations, third molars and facial growth pattern do not seem to influence maxillary extraction sites reopening.

Potentialities and limitations of computer-aided design and manufacturing technology in the nonextraction treatment of Class I malocclusion.

INTRODUCTION: Computer-aided design and manufacturing (CAD-CAM) systems have assisted orthodontists to position brackets virtually. The purpose of this study was to evaluate if a CAD-CAM system could predict the orthodontic treatment outcome of patients with Angle Class I malocclusion with mild crowding or spacing and with no need for orthodontic extraction. METHODS: Using the American Board of Orthodontics Cast-Radiograph Evaluation (ABO-CRE) and color map superimposition, the treated occlusion was compared with the virtual final occlusion of 24 young adults with Class I occlusion. Using eXceed software (eXceed, Witten, Germany), we created the final occlusion prediction for each patient (virtual set up group). A digital model of the final occlusion of each patient was created (treated occlusion group). ABO-CRE score was used to compare groups. In addition, a color map was created for all subjects to access the mean and range values between the virtual set up model and treated occlusion model of each patient. Random and systematic errors were calculated. In addition, chi-square and t test were used. RESULTS: Comparisons between virtual set up occlusion and treated occlusion showed statistically significant differences in 3 out of 7 measurements: interproximal contact score was larger for treated than virtual occlusion (0.45 mm and 0.04 mm, respectively), and the treated occlusion showed larger values than the virtual occlusion for occlusal contacts (14.13 mm and 7.62 mm, respectively) and overjet (7.37 mm and 0.66 mm, respectively). Although the treated occlusion showed a larger score than the virtual occlusion (50.41 mm and 34.58 mm, respectively), there is no significant difference between both. Root angulation decreased (from 1.95 ± 1.29 to 0.65 ± 0.71) because of the treatment. CONCLUSIONS: ABO-CRE overall score presents no difference between groups. In addition, CAD-CAM setup occlusion closely predicts the final teeth alignment and leveling with interarch relationships showing less ABO-CRE score deduction.

Factors affecting the stability of maxillary extraction site closure

ABSTRACT Introduction: A side effect observed in cases treated with extractions is the instability of orthodontic space closure. Objective: The aim of this study was to investigate the influence of gingival invagination, presence of third molars and facial pattern, on the stability of orthodontic space-closure in the maxillary arch. Methods: Ninety-nine subjects (41 male and 58 female) with Class I malocclusion treated with four premolars extraction were evaluated. Extraction sites reopening and gingival invaginations were evaluated in scanned dental models in the posttreatment and 1-year posttreatment stages (mean age 16.1 years). Third molars presence was evaluated at 1-year posttreatment panoramic radiographs, and the facial pattern (SN.GoGn) was evaluated in the initial lateral headfilms. Multiple logistic regression analysis was used to estimate the influence of the aforementioned independent variables on the frequency of extraction space reopening. Results: Space reopening was observed in 20.20% of the subjects 1-year post-debonding. Gingival invaginations were present in 25.73% of quadrants after debonding and in 22.80% 1-year posttreatment. The mean pre-treatment SN.GoGn was 35.64 degrees (SD=5.26). No significant influence was observed of the three independent variables on the instability of extraction site closure. Conclusions: The presence of gingival invaginations, third molars and facial growth pattern do not seem to influence maxillary extraction sites reopening.

RESUMO Introdução: Um efeito colateral observado nos casos tratados com extrações é a instabilidade do fechamento ortodôntico do espaço. Objetivo: O objetivo do presente estudo foi investigar a influência da invaginação gengival, da presença de terceiros molares e do padrão facial na estabilidade do fechamento ortodôntico dos locais de extração na arcada superior. Métodos: Noventa e nove indivíduos (41 homens e 58 mulheres) com má oclusão de Classe I tratados com extração de quatro pré-molares foram avaliados. A reabertura dos locais de extração e as invaginações gengivais foram avaliadas nos modelos dentários digitalizados nos estágios pós-tratamento e um ano pós-tratamento (idade média de 16,1 anos). A presença dos terceiros molares foi avaliada em radiografias panorâmicas de um ano pós-tratamento, e o padrão facial (SN.GoGn) foi avaliado nas radiografias laterais iniciais. Análise de regressão logística múltipla foi utilizada para estimar a influência das variáveis independentes citadas na frequência de reabertura do espaço de extração. Resultados: A reabertura do espaço foi observada em 20,20% dos sujeitos um ano após a remoção do aparelho. Invaginações gengivais estiveram presentes em 25,73% dos quadrantes após a remoção do aparelho e em 22,80% após um ano pós-tratamento. O SN.GoGn pré-tratamento médio foi de 35,64 graus (DP = 5,26). Não foi observada influência significativa das três variáveis independentes sobre a instabilidade do fechamento do local de extração. Conclusões: A presença de invaginações gengivais, terceiros molares e padrão de crescimento facial não parece influenciar na reabertura dos locais de extração maxilar.

Lower incisor extraction therapy in a complex case with an ankylosed tooth in an adult patient: A case report.

This case report describes a successful orthodontic therapy of an adult female treated by mandibular central incisor extraction and vestibular fixed appliances. The patient presented a skeletal Class I with normodivergent facial pattern, Class II subdivision dental relationship, extremely deep Curve of Spee and severe overbite. Moreover, during the treatment, the upper left first molar does not respond to orthodontic forces due to tooth ankylosis, augmenting the difficulty of this case. Despite this, a good occlusal relationship on both sites and an optimal extraoral outcome have been achieved after a 26-months therapy. To our knowledge no case report with such entity of Curve of Spee with contemporary tooth ankylosis has been presented.

Simplified orthognathic surgical treatment using non-surgical asymmetric maxillary expansion: A case report.

BACKGROUND: Transverse problems can be exacerbated by highly compensated occlusion in patients with skeletal asymmetry, which makes pre-surgical decompensation harder to achieve. OBJECTIVE: This case report describes a case of combined orthognathic surgery with facial asymmetry. We used pre-orthodontic surgical simulation to visualize the goal for presurgical orthodontics, planning for a one-jaw surgical treatment option. METHODS: The planned asymmetric expansion was performed using a maxillary skeletal expander (MSE II) with surgical corticopuncture over only the left side before MSE activation. Surgery was performed to achieve mandibular left outward yaw rotation to correct the patient's facial asymmetry after the planned amount of expansion was reached. RESULTS: The results showed substantial improvement of facial aesthetics as well as skeletal symmetry. Cooperation and communication between surgeon and orthodontist ensured that the final results were satisfactory.

Comparison of the collum angle of incisors and canines in skeletal malocclusions - A CBCT study.

INTRODUCTION: The collum angle that defines the crown root angulation of the single rooted teeth plays an important in treatment planning. OBJECTIVE: To compare the collum angle (crown root angulation) of maxillary and mandibular anterior teeth in different skeletal malocclusions using Cone Beam Computed Tomography (CBCT). MATERIALS AND METHODS: Sixty subjects were categorized into four groups (fifteen subjects in each group) Class I, Class II division 1, Class II division 2 malocclusion and Class III based on Angle classification, Wits and ANB. The collum angle of maxillary and mandibular anterior teeth was measured using CBCT. One way ANOVA, Post hoc comparison with Tukey HSD and Paired t-test were used to analyse the measured data. RESULTS: The collum angle of corresponding right and left side teeth were averaged. Thus, the mean and standard deviation of the collum angle (n-30) were generated for maxillary and mandibular central incisors, lateral incisors, and canines. A statistically significant increase was observed in the maxillary central incisors of Class II division 2 and mandibular lateral incisors of class III malocclusion. The collum angle was increased in mandibular canines of Class III malocclusion when compared with class I and Class II division 2 malocclusion. The collum angle was negative in mandibular central incisors of Class II division 2. No statistically significant difference was observed in the mean collum angle between the right and left side anterior teeth in all the four groups. CONCLUSION: A variation in Collum angle was observed between the maxillary and mandibular anterior teeth and malocclusions. The effect of these variations in collum angle in torque expression and biomechanics should be kept in mind by the orthodontist before treatment planning especially in Class II division 2 malocclusion.

2D-3D comparison of the temporomandibular joint in skeletal Class II versus Class I adults: A retrospective study.

OBJECTIVE: To compare the temporomandibular joint (TMJ) morphological characteristics in people with Class II versus Class I sagittal skeletal relationship and to identify other factors that influence the TMJ dimensions. MATERIAL AND METHODS: This cross-sectional and retrospective study evaluated 188 people divided into two groups, 92 cone-beam computed tomographies (CBCTs) and lateral radiographs (LR) of people with Skeletal class II relationship with Class II division 1 malocclusion versus 96 CBCTs and LR of people with Class I skeletal relationship and Class I malocclusion (controls). The CBCTs included people of both sexes, aged between 15 and 65 years old. The 3D Imaging Carestream Software was used to evaluate the condyle height and neck width, mediolateral and anteroposterior condyle dimensions, the shape of the glenoid fossa and condyle in the CBCTs. Likewise, the ANB angle, the Wits appraisal and other measurements were evaluated on LR. Besides, Mann-Whitney U, Chi2 and multiple linear regression tests were performed. The significance level was set at P˂0.05. RESULTS: The mediolateral and anteroposterior condyle dimensions were smaller in class II people (1.82mm and 0.29mm, respectively) than class I people (P<0.05). Likewise, height and neck width of condyle were smaller in class II people (0.73mm and 0.40mm, respectively) than class I people (P<0.05). Multiple linear regression identified mainly the ANB angle as a factor (P<0.05) that influenced the dimensions, decreasing the condyle dimensions in skeletal class II relationship. CONCLUSIONS: People with skeletal class II relationship showed smaller condyle dimension values than class I people. A decrease in the dimensions of the eminence and the condyle could be expected when the ANB angle increases.

Morphometric analysis of sella turcica in growing patients: an observational study on shape and dimensions in different sagittal craniofacial patterns.

The aim of this study was to evaluate the differences in sella dimensions and shape between growing patients with Class I, Class II, and Class III skeletal malocclusions, evaluated through morphometric analysis. Seventy-eight subjects aged between 9 and 13 years were selected and assigned to either the Class I, Class II, or Class III groups according to the measured ANB angle (the angle between the Nasion, skeletal A-point and skeletal B-point). Six landmarks were digitised to outline the shape of the sella turcica. Linear measurements of the sella length and depth were also performed. Procrustes superimposition, principal component analysis, and canonical variate analysis were used to evaluate the differences in sella shape between the three groups. A one-way MANOVA and Tukey's or Games-Howell tests were used to evaluate the presence of differences in sella dimensions between the three groups, gender, and age. The canonical variate analysis revealed a statistically significant difference in sella shape between the Class I and the Class II groups, mostly explained by the CV1 axis and related to the posterior clinoidal process and the floor of the sella. No differences were found regarding linear measurements, except between subjects with different age. These differences in sella shape, that are present in the earlier developmental stages, could be used as a predictor of facial growth, but further studies are needed.

First premolar extractions in an adolescent presenting a Class I biprotrusion malocclusion with skeletal Class II: A case report.

This case report shows the orthodontic treatment of four first premolar extractions of a 14-year-old teenager presenting a dental Class I malocclusion with a severe retrognathic mandible. It reflects conflicting views on objectives between the orthodontist who takes into account the facial balance and the patient who only desires a tooth alignment.

Correcting severe scissor bite in an adult.

Scissor bite often remains unnoticed by patients although it can adversely affect facial symmetry, jaw growth, and mastication. This case report illustrates the efficacy of temporary skeletal anchorage devices (TSADs) and a modified lingual arch in correcting severe scissor bite. A 28-year-old woman presented with severe scissor bite in the mandibular right posterior segment. To treat this condition, TSADs were used for maxillary posterior intrusion and a modified lingual arch for buccally uprighting mandibular posterior teeth. Long-term retention records demonstrate stable treatment results.

Evaluation of Vestibular Bone Thickness in Class I Malocclusion Treatment With Corticotomy-Assisted Rapid Orthodontics.

BACKGROUND: Corticotomy-assisted rapid orthodontics is a widely used method for speeding up conventional orthodontics. This study (i) evaluates the effects of corticotomy alone, corticotomy combined with bone graft, and corticotomy with platelet-rich fibrin (PRF) on vestibular alveolar bone thickness in patients with class I malocclusion; (ii) compares the treatment time with a conventional orthodontic therapy group, and (iii) investigates the periodontal health of patients who have undergone corticotomy-assisted rapid orthodontics. METHODS: The patients were divided into 3 groups: Group 1 (n = 10) underwent corticotomy alone; Group 2 (n = 10) underwent corticotomy combined with bone graft, and Group 3 (n = 10) underwent corticotomy combined with PRF. In the following stage, vestibular alveolar bone thicknesses were evaluated using 3-dimensional cone-beam computed tomography images. RESULTS: The findings showed that Group 2 achieved a more significant augmentation of the vestibular alveolar bone than Groups 1 and 3 (P = 0.001, P = 0.003), while corticotomy-assisted rapid orthodontics decreased treatment times. Sufficient alveolar bone thickness and preservation of the periodontal health were achieved when the corticotomy procedure was either combined with a bone graft or with PRF in the Class-I malocclusion patients. CONCLUSION: Bone grafts provided better bone thickness at the buccal surface of the anterior teeth of the mandible and maxilla, whereas the thickness of the keratinized gingiva was better with PRF.

Evaluation of preferred lip position according to different tip rotations of the nose in class I young adult subjects.

INTRODUCTION: The mouth plays an important role in the overall aesthetic appearance of the face. The aims of this study were to determine the optimal antero-posterior (AP) lip position relative to various rotations of the nasal tip and assess the impact of the nasolabial angle on facial aesthetics. MATERIAL AND METHODS: Three-dimensional facial volumes, in motion, of one Caucasian male and one Caucasian female with a Class I malocclusion and an orthognathic profile were modified to alter the nasal tip rotation (3 rotations) and the AP lips position (6 positions). 72 generated models were created in two and three-dimensions. Generated models were rated online by 60 dentists, 60 orthodontists and 60 laypeople, using a Visual Analogue Scale. Scores were analysed according to lip position, rater's profession and gender. RESULTS: General agreement was found between all groups on the most and least preferred lip positions. No differences between male and female raters were found. All raters were more influenced by the 3-dimensional rotating facial volume than by 2-dimensional angles. Similar angular values for the nasolabial angles were found in the most and least preferred profiles, showing that the most influential factor in facial aesthetics was the lip position, and stressing the need to evaluate each component of the nasolabial angle independently. CONCLUSION: The lip position was the determinant factor in facial aesthetics with little influence of the nose tip rotation. Three-dimensional evaluation of the nose and lip were needed to establish a soft tissue-based treatment plan.

Three-dimensional skeletal and dental patterns obtained from cone-beam computer tomography of patients diagnosed as malocclusion class I.

The purpose of this study was to locate the landmarks both in traditionally-used two-dimensional (2D) lateral cephalogram images and newly suggested landmarks in three-dimensional (3D) cone-beam computer tomography (CBCT) images to determine possible relationships between them and determine if they could be used to classify patients of malocclusion Class I. MATERIAL AND METHODS: CBCT images from 30 patients with malocclusion Class I were selected from the university of Alberta Graduate Orthodontic Program database. The images were then reconstructed using the AVIZO® software platform to visualize and locate landmarks. There were a total of forty-two landmarks chosen for analysis, which included pre-existing landmarks used in 2D imaging as well as new landmarks suggested for 3D analysis. Descriptive statistics were also assessed using SPSS statistical package to determine any skeletal and dental relationships. RESULTS: Descriptive statistics show that the linear and angular measurements used in 2D images did not correlate well with measurements in CBCT. The lowest standard deviation obtained was 0.04 for S-GoL/N-Me with a mean of 0.70mm. The highest standard deviation was 17.46 for FH-MPL with a mean of 41.53mm. CONCLUSION: The traditional landmarks used for 2D analysis of malocclusion did not show specific skeletal or dental patterns for analysing and classifying 3D images as malocclusion Class I.

European College of Orthodontics. Commission of affiliation and titularisation. Case No. 17153.

Date of birth: 17/11/1998; gender: female. A. PRE-TREATMENT DOCUMENTS: 11 years old; 02/2010. DIAGNOSIS: Angle's class: class II division 2. Missing teeth before treatment: none. TREATMENT PLANNING: Without extractions. Alignment, levelling and arch coordination with intermaxillary class II alastics. Intercuspidation, finishing. Damon's bimaxillary multi-bracket. Beginning of treatment: 12 years old; 10/2010. B. POST-TREATMENT DOCUMENTS: 14 years old; 11/2012. Treatment duration: 25 months. C. POST-RETENTION DOCUMENTS (MINIMUM 1 YEAR): 09/2016; 18 years old. Retention period: unlimited. Maxilla: vacuum-formed retainer (night-only). Mandible: bonded wire from 33 to 43.

European College of Orthodontics. Commission of affiliation and titularisation. Case No. 17043.

Date of birth: 4/02/97; gender: female. PRE-TREATMENT DOCUMENTS: 13.7 years old; 09/2010. DIAGNOSIS: Angle's class: class II subdivision. Missing teeth before treatment: none. TREATMENT PLANNING: Extractions of four first premolars 14, 24, 34, 44. Class II molar and discrepancy correction. Intercuspidation, finishing. Bimaxillary multi-bracket. Beginning of treatment: 12 years old; 10/2010. POST-TREATMENT DOCUMENTS: 15.6 years old; 8/2012. Treatment duration: 17 months. POST-RETENTION DOCUMENTS (MINIMUM 1 YEAR): 06/2016; 19.4 years old. Retention period: unlimited. Maxilla: bonded wire from 12 to 22, vacuum-formed retainer (night-only). Mandible: bonded wire from 33 to 43, vacuum-formed retainer (night-only).